THE ORIGINAL ADHESIVE AND FILLER SYSTEM , DONT BE FOOLED BY IMITATIONS
Call Us Free: 705-657-7405

Instructions

How to use Insta-Fix Pro

The most common mistake when using any kind of superglue is improper preparation. We have produced not just Insta-Fix Pro, but the Insta-Fix Pro System including easy to follow instructions and a chart of applications.
  • Step 1

    Use an acetone-based solvent (i.e. nail polich remover) to clean
    areas where Insta-Fix Prowill be applied. Surfaces must be free of
    rust, grease, dust, old glue, etc. Allow solvent to dry. Remove
    remaining material with sandpaper if necessary.

  • Step 2

    Make sure the surfaces to be bonded fit together with no gaps,
    if gaps exist refer to the filler instructions.

  • Step 3

    Apply a small amount of Insta-Fix Proto one side of the repair;
    press firmly together for about 30 seconds, let it set for
    5 minutes. If there are gaps in the area use filler to repair,
    see filler instructions. Most repairs can be used in minutes after
    they are finished. The tighter you press together the stronger the bond will be.

Click Buttons Below To Download Insta-Fix Pro Instruction Sheet
English French

Contact Us

THE PHYXALL CORP
51 Hall Cres, Buckhorn Ontario, K0L 1J0
Office: (705) 243-3407
Cell: 416 889 0933
Fax: 705-657-7405
President / Carson Manning
Website: http://www.instafixpro.com
Email:  info@instafix.com

Developed by

Phyxall Corp.